Condensate Drain Pan Replacement

Standard replacement of condensate drain pain per industry standards.

This is a standard condensate drain pan replacement, wherein we remove and replace the pan to prevent water intrusion and properly dispose of condensation to ensure proper system operation and limit water damages. 

Definition: Condensation is a normal part of the air conditioning processes. Inside the air conditioning system (or furnace) is a drain pan that catches the condensation that falls off the condenser coils. This water is then directed through a pipe where it is discharged outside or down a drain.

Scope of Work

1.   Perform required lockout/tag out safety protocol of NFPA70E of all high voltage electrical circuits prior to beginning work on the unit.
2.   Remove and dispose of existing condensate drain pan.
3.   Furnish and install (1) new condensate drain pain.
4.   Reassemble unit completely.
5.   Basic start-up and testing of newly installed condensate drain pan to ensure that it is performing with in manufacturers specifications per the unit’s nomenclature.

This article has been shared by Direct Service, Construction and Design to specifically accommodate our intended clientele.  The intent of sharing this information is to better inform the public of these general topics, expand knowledge and safety for all and provide crucial information in regard to their MEP and building systems and/or assets. It is NOT our recommendation that any article recommendations or how-to scenarios be attempted by anyone other than a qualified or competent person.