Backflow Prevention Device Replacement

Standard replacement of backflow preventer per industry standards.

This is a standard backflow preventer replacement, wherein we remove and replace the backflow preventer. 

Definition:  A backflow prevention device is used to protect potable water supplies from contamination or pollution due to backflow. In water distribution systems, water is normally maintained at a significant pressure to enable water to flow from the tap, shower, or other fixture.  Reduced pressure in the pipe may allow contaminated water from the soil, from storage, or from other sources to be drawn up into the system.  Backflow prevention devices are designed to specifically counteract this backflow effect.

Scope of Work

1.   Remove and dispose of existing failed or replace missing backflow prevention device.
2.   Furnish and install (1) new properly sized backflow preventer.
3.   Furnish and install appropriate code-approved fittings and piping.
4.   Please note:  Water is typically shut off for approximately 1 to 2 hours.
5.   If work must be performed after normal hours, pricing of quotes may be higher than if work is performed during normal business hours.
6.   Full operational testing performed upon completion, prior to site departure.
7.   Does not include repairs made to an existing backflow cage or installation of new cage(s).

This article has been shared by Direct Service, Construction and Design to specifically accommodate our intended clientele.  The intent of sharing this information is to better inform the public of these general topics, expand knowledge and safety for all and provide crucial information in regard to their MEP and building systems and/or assets. It is NOT our recommendation that any article recommendations or how-to scenarios be attempted by anyone other than a qualified or competent person.